Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cranking No start, no spark, <12v at FI fuse
#6
So got an update, apparently my electrical trouble shooting was a little.... off. Turns out that isn’t my problem.

I swapped in a distributor from a 97, but I’m going to need to retime it. But there is good news!! I have spark now since it’s rumbles and puff. Very close to starting but can’t quite do it.

That’s better than just endless cranking.

My distributor: http://imgur.com/U593lBS

Distributor on running 97: http://imgur.com/IPJO2UG
Reply


Messages In This Thread
RE: Cranking No start, no spark, <12v at FI fuse - by Perry - 05-17-2018, 04:16 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)