05-08-2018, 11:21 AM
did you crimp on the spade lug on to the insulation?
we have it. its real simple this part.
the fuse runs all gauges, so is not that.
the wire is open, you proved that.
the drawing is on my page 95 16v.
schematics.
page 2, is 16v
http://www.fixkick.com/power-elect/95%20...5GAGES.pdf
i think your spade is no good, do over, and fixed.
unless c204 or c208 are rusty.
so glad to see you car running again wow.
we have it. its real simple this part.
the fuse runs all gauges, so is not that.
the wire is open, you proved that.
the drawing is on my page 95 16v.
schematics.
page 2, is 16v
http://www.fixkick.com/power-elect/95%20...5GAGES.pdf
i think your spade is no good, do over, and fixed.
unless c204 or c208 are rusty.
so glad to see you car running again wow.
http://www.fixkick.com