Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sealing the CMP?
#9
I hope it seals ok, if not the hole it fits into is corroded or damaged, (its one or the other)
some parts knockoffs from china are not engineered. (means not made from real suzuki plans and real drawings)
they actually measure a part and copy it, thus the term used,Knock off.

no allowance for the plastic to shrink just fresh out of the casting die... so the parts are undersized. and leak.
or use the wrong o-ring, again they guess, and guess wrong. (no drawings knockoffs)
gotta love cloning , no? (friendly sarc to THEM)

wishing you good luck on stopping leaks, some are not easy to cure.
http://www.fixkick.com
Reply


Messages In This Thread
Sealing the CMP? - by Joe Tracker - 04-14-2018, 03:18 AM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 04:11 AM
RE: Sealing the CMP? - by Joe Tracker - 04-14-2018, 06:20 AM
RE: Sealing the CMP? - by Joe Tracker - 04-14-2018, 10:56 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:41 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:51 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:53 PM
RE: Sealing the CMP? - by Joe Tracker - 04-15-2018, 12:59 AM
RE: Sealing the CMP? - by fixkick - 04-20-2018, 10:35 PM
RE: Sealing the CMP? - by Joe Tracker - 04-28-2018, 06:27 AM
RE: Sealing the CMP? - by fixkick - 04-28-2018, 08:38 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)