04-07-2018, 06:27 AM
(04-03-2018, 09:36 PM)fixkick Wrote: very good,
make sure the cam belt is ok, and the big bolt 17mm on the crank front end, is set to 94ft/lbs. (in 5th gear, clocked there brakes hard set)
happy trails,
and cheers !
I bought two of these AC/Delco COP's off eBay for my 1.6L. The appear 100% authentic and my engine is running great with the new COP's (and also new NGK wires and plugs and the new camshaft sensor). Not bad for $56 for two new COP's. The link to the eBay listing is in my first post on this thread. The Techron injector cleaner probably played a part as well.
I will check the torque on the crank front end bolt for correct torque. I will also check the cam belt (it was replaced at 134,000 and I am at 145,000 now).
Cheers!
Joe Tracker