Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Crank Angle Position sensor?
#10
(02-22-2018, 11:18 PM)ChristofferSeyer Wrote:
(02-22-2018, 06:46 AM)ChristofferSeyer Wrote:
(02-22-2018, 06:29 AM)fixkick Wrote: that distrib looks like our old 1989, with ignitor missing.inside. a VR only sensor.



Haha yes! That's why I bought a new one. I have a new distributor installed just don't have any pictures atm. Could it be annything else? The ECU? Whats up with the 42 code with a new distributor? New cables, new rotor, new cap, new coils, power on all cables, but no ignition even on startgas. What am I missing?


Went through the ecu and it looks like brand new, so nothing there. Voltage is good on cables from ecu to distributor.

Serial:


Attached Files Thumbnail(s)
   
Reply


Messages In This Thread
RE: Crank Angle Position sensor? - by fixkick - 02-22-2018, 05:43 AM
RE: Crank Angle Position sensor? - by fixkick - 02-22-2018, 06:24 AM
RE: Crank Angle Position sensor? - by fixkick - 02-22-2018, 06:28 AM
RE: Crank Angle Position sensor? - by fixkick - 02-22-2018, 06:29 AM
RE: Crank Angle Position sensor? - by ChristofferSeyer - 02-22-2018, 11:24 PM
RE: Crank Angle Position sensor? - by fixkick - 03-17-2018, 11:06 PM
RE: Crank Angle Position sensor? - by fixkick - 03-17-2018, 11:07 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)