02-12-2018, 10:13 AM
no stock USA 1996 sidekick or tracker has a washer there
not one, and if added from a pre 95 car, it be bad news.
who ever sold you the kit sold you a pre 96 kit.
sorry.
the correct parts are at suzuki if you need numbers please ask.
the wear is from the cog flopping about madly on the end if the crank, .
my slide show shows many like that, the pump front will not be damaged, just ugly it is.
the real damage is the snout of crank.
all bolts act as spring,
i not for that all will fall off, even with lock washers.
the threads need no locktite, but the non super hard is ok.
94ft/lbs is tight.
the old spec was as low as 45 flt lbs, way too loose.
changed in 1996 and covers 89-98 cranks.
good luck to you !!!!!!!
not one, and if added from a pre 95 car, it be bad news.
who ever sold you the kit sold you a pre 96 kit.
sorry.
the correct parts are at suzuki if you need numbers please ask.
the wear is from the cog flopping about madly on the end if the crank, .
my slide show shows many like that, the pump front will not be damaged, just ugly it is.
the real damage is the snout of crank.
all bolts act as spring,
i not for that all will fall off, even with lock washers.
the threads need no locktite, but the non super hard is ok.
94ft/lbs is tight.
the old spec was as low as 45 flt lbs, way too loose.
changed in 1996 and covers 89-98 cranks.
good luck to you !!!!!!!
http://www.fixkick.com