11-24-2013, 09:14 PM
crank bolt was +90 ft pounds YAY, i used my torque wrench on it to loosen to check...
top of motor dry.. bottom wet.. crank seal must have not liked the 20 degree weather here all of a sudden! I'm doing the belt and tensioner soon as i get parts!! aalso the oil pump bolts were a bit losose , i gave them a snug up
top of motor dry.. bottom wet.. crank seal must have not liked the 20 degree weather here all of a sudden! I'm doing the belt and tensioner soon as i get parts!! aalso the oil pump bolts were a bit losose , i gave them a snug up