12-06-2017, 03:11 AM
wow! a hell of a response there! I will have to take that in one sentence at a time. Most is way over my head. The smallest i can shrink the photos is 3000x3000.. stupid 16 megapixl phone camera. a pic is worth a 1000 words! some info i left out. it is a 2 door with 3 speed trans. also we just had a winter storm blow in last night.. was 72F yesterday. now is 28F! so i have not messed with the tps yet but looking at it.. the slots where the screws go into. these slots are so that the tps can be turned and adjusted by hand. mypoint. mine is currently turned all the way to one side. full gap on one side of the screw... no gap on other.. leads me to believe someone messed with it. also the do not touch stop screw... looks like a small set screw with a locking nut on it? should there be a cover? mine does not have a cover. but throttle blade movment is very smooth inside bore. no rubbing
it appears to close 99.9999% no gaps. no "over closing" im heading out for a drive right now with cel pin inserted. will also check termostat housing tem with IR gun when i return/hot
it appears to close 99.9999% no gaps. no "over closing" im heading out for a drive right now with cel pin inserted. will also check termostat housing tem with IR gun when i return/hot