06-15-2017, 01:22 PM
(06-15-2017, 11:48 AM)fixkick Wrote: buy a 96-98 hub,
it will fit.
if car is stock it fits.
the GM does not sell them now, in fact , they only list Chevrolet trackers now, 98 or newer, the word GEO is but a dream to them it seems. now.
Okay thanks.
I'm heading into Oregon tomorrow to buy the entire knuckle assembly off a 1997 Tracker, 4x4, without ABS.
I need the spindle also, not just the hub but I guess that is the same as the 1996 also?
For now if everything's right I just plan on bolting the knuckle on, (inserting the axle of course), swapping out caliper bracket, installing new pads, hopefully the rotor is in good shape or replace with a new one...and go from there.
Then replace both wheel bearings later to avoid this mess again.