10-28-2013, 11:00 PM
Cylinder head is back from the machine shop, he did not have to replace valve (s), he said it was a pitted valve seat and he was able to fix it, he pressure tested it and measure for warp, everything checked out. I will be putting it back together during the course of this week. Exhaust manifold started cracking again on cylinder 4's tube, right where it was welded before, I will re-weld for the time being. I hope to fire it up by next weekend.
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c