OK, so I ordered a cylinder head, but I am not sure I was sent the right thing.
Does the distributor gear need a flat ground on the camshaft?
I did some searching and it looks like I have the same problem as was
described at: http://www.suzuki-forums.com/suzuki-side...-gear.html
The cam has no distributor drive gear, If it's the right thing it would be easy to press on my old one?
How can I tell before I strip down the top of the engine (1996 Tracker G16B SOHC) if back of head has a different
disty mount FIT?
I think that it may have been you playing God.
Does the distributor gear need a flat ground on the camshaft?
I did some searching and it looks like I have the same problem as was
described at: http://www.suzuki-forums.com/suzuki-side...-gear.html
The cam has no distributor drive gear, If it's the right thing it would be easy to press on my old one?
How can I tell before I strip down the top of the engine (1996 Tracker G16B SOHC) if back of head has a different
disty mount FIT?
I think that it may have been you playing God.