05-25-2017, 03:32 AM
my page clearly shows the mm base size
this tells you if its 96 or pre 96. in seconds
why not use that, after all i cant see your TB and know that, and use my ruler..
its just 2 sensors used, on all G16b. 89 to 1998,
only 2, (not talking X90s or on VITARAs, just your car)
try to know that cars this old get engine swaps and omg ,TB swaps.
try to now what your store sells you, can be wrong, your car is VIN CODE 6, engine.
most stores are clueless on VIN,, brain dead clueless.
but even if they did do the VIN right what if the owner put in a 95 TB in your engine. 96. then the parts sold will BE WRONG, (50% of the time)
the correct suz, number is
13420-58B10
buy one,
see that B10 that is the new 1996 basic size changed.
there are NO MIKUNI books here.
zero.
the narrow base is 1996+
and is 31mm, got a ruler, off the TPS measure that boss rim (circle) see its 31mm, the 95 is far bigger.
they made it smaller for kicks, really dumb idea doing this, no need for it but that is what engineers do ,change stiff for no reasons. (my guess is to use newer stock in the factory and delete old)
across many cars. made.
this tells you if its 96 or pre 96. in seconds
why not use that, after all i cant see your TB and know that, and use my ruler..
its just 2 sensors used, on all G16b. 89 to 1998,
only 2, (not talking X90s or on VITARAs, just your car)
try to know that cars this old get engine swaps and omg ,TB swaps.
try to now what your store sells you, can be wrong, your car is VIN CODE 6, engine.
most stores are clueless on VIN,, brain dead clueless.
but even if they did do the VIN right what if the owner put in a 95 TB in your engine. 96. then the parts sold will BE WRONG, (50% of the time)
the correct suz, number is
13420-58B10
buy one,
see that B10 that is the new 1996 basic size changed.
there are NO MIKUNI books here.
zero.
the narrow base is 1996+
and is 31mm, got a ruler, off the TPS measure that boss rim (circle) see its 31mm, the 95 is far bigger.
they made it smaller for kicks, really dumb idea doing this, no need for it but that is what engineers do ,change stiff for no reasons. (my guess is to use newer stock in the factory and delete old)
across many cars. made.
http://www.fixkick.com