Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
will crank but not start
#5
see side of the distributor
see that LV connector
inspect it for damage or rust, there.
wire damage , rust, or? just look at it. carefully for damage of any kind,
this the twin cam G13B?
this has tone wheel on front of crank im looking in the drawing of the parts book
CKP is there.
wow a chain drive DOHC.
no distributor.
2 sensors, cmp and ckp
both need to work.
2 COP coil;s one for 1-4 cyl, one for 2-3 cylinder
is this your engine.?
find the 2 sensors, the parts list does no show where they fit.

but the CKP must be at that front crank pulley read, at the tone wheel there.
the CMP must be on the end of the 2 cams.
4 corners of head. must be. 2 cams, 4 ends, 1 sensor.

there you go.
i have p/n of parts if this G13b is twin cam.
http://www.fixkick.com
Reply


Messages In This Thread
will crank but not start - by gymknee98 - 04-25-2017, 04:24 AM
RE: will crank but not start - by fixkick - 04-25-2017, 10:24 PM
RE: will crank but not start - by gymknee98 - 04-26-2017, 12:30 AM
RE: will crank but not start - by fixkick - 04-26-2017, 12:58 AM
RE: will crank but not start - by fixkick - 04-26-2017, 01:12 AM
RE: will crank but not start - by fixkick - 04-26-2017, 01:18 AM
RE: will crank but not start - by fixkick - 04-26-2017, 01:36 AM
RE: will crank but not start - by fixkick - 04-26-2017, 01:38 AM
RE: will crank but not start - by gymknee98 - 04-26-2017, 01:29 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)