02-07-2017, 09:42 PM
the TPS on the J18 up
are set using only any voltmeter, no feeler guages now. 96 first year to offer this easy way, nice. really
this is one my one-point-eight page
and the TPS page and the real page from suz
hot engine, so the fast idle device (step 3 forgets to say why ,stops are wrong) hot. water is answer
http://www.fixkick.com/sensors/tests/TPS...ml#1.8_cal
page 3, but doing it at ECU is bit crazy, the TPS can be reached more easy
http://www.fixkick.com/sensors/TPS/1.8%2...PS-CAL.pdf
see the gray wire with no sripe, that is TP pin 0.5v set
http://www.fixkick.com/ECU/18L/18LiterECU1.pdf
are set using only any voltmeter, no feeler guages now. 96 first year to offer this easy way, nice. really
this is one my one-point-eight page
and the TPS page and the real page from suz
hot engine, so the fast idle device (step 3 forgets to say why ,stops are wrong) hot. water is answer
http://www.fixkick.com/sensors/tests/TPS...ml#1.8_cal
page 3, but doing it at ECU is bit crazy, the TPS can be reached more easy
http://www.fixkick.com/sensors/TPS/1.8%2...PS-CAL.pdf
see the gray wire with no sripe, that is TP pin 0.5v set
http://www.fixkick.com/ECU/18L/18LiterECU1.pdf
http://www.fixkick.com