I mentioned earlier in 2 posts asking advice in purchasing a scanner. I don't know which one to buy, and nobody has replied to that. I also mentioned several times that I have erased the codes and it has not since reset a code.
why is always 3 factors. Basics.... all...
1 compression ok. (and can breath air and pump air, ok.) means cat not melted yours is not. - YES, as posted earlier
2 spark ok - YES, at least when I check it idling.
3 fueling ok. - I have a gauge ordered to check that
in that order.
see why/?
sure, because each latter one , the former must be good. (called predicates)
see?
For example:
you cant burn gas, with Dead or weak spark. see? I know that.
why is always 3 factors. Basics.... all...
1 compression ok. (and can breath air and pump air, ok.) means cat not melted yours is not. - YES, as posted earlier
2 spark ok - YES, at least when I check it idling.
3 fueling ok. - I have a gauge ordered to check that
in that order.
see why/?
sure, because each latter one , the former must be good. (called predicates)
see?
For example:
you cant burn gas, with Dead or weak spark. see? I know that.