Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Muffler question
#18
I wanted the muffler to spin around smoothly at high rpm, so since the car was a Toyota I thought Koyo bearings would be a good idea. If I remember correctly, they were branded Beck/Arnley. I 100% remember that they were ordered from RockAuto.com. The RockAuto website had a picture of the bearings showing Koyo, so I ordered those. When I opened the box, I pulled out bearings with some Ching Chow writing on them, but no "Koyo" name etched anywhere.
Reply


Messages In This Thread
Muffler question - by Zackman - 07-18-2016, 09:03 AM
RE: Muffler question - by Zackman - 07-19-2016, 09:00 PM
RE: Muffler question - by Zackman - 07-21-2016, 05:43 AM
RE: Muffler question - by t3tom - 07-22-2016, 03:40 AM
RE: Muffler question - by Zackman - 07-22-2016, 11:00 PM
RE: Muffler question - by fixkick - 07-22-2016, 11:37 PM
RE: Muffler question - by fixkick - 07-22-2016, 11:45 PM
RE: Muffler question - by Zackman - 07-23-2016, 12:43 AM
RE: Muffler question - by fetcher - 01-12-2017, 10:30 AM
RE: Muffler question - by fixkick - 01-12-2017, 11:24 AM
RE: Muffler question - by fetcher - 01-12-2017, 11:39 PM
RE: Muffler question - by fixkick - 01-13-2017, 01:16 AM
RE: Muffler question - by fetcher - 01-13-2017, 02:42 AM
RE: Muffler question - by fixkick - 01-13-2017, 03:53 AM
RE: Muffler question - by fixkick - 01-13-2017, 03:54 AM
RE: Muffler question - by fetcher - 01-13-2017, 06:31 AM
RE: Muffler question - by fixkick - 01-13-2017, 07:25 AM
RE: Muffler question - by fixkick - 01-13-2017, 07:28 AM
RE: Muffler question - by fetcher - 01-13-2017, 09:07 AM
RE: Muffler question - by fixkick - 01-17-2017, 11:46 PM
RE: Muffler question - by fetcher - 01-18-2017, 01:28 AM
RE: Muffler question - by fixkick - 01-18-2017, 03:05 AM
RE: Muffler question - by fixkick - 01-18-2017, 03:12 AM
RE: Muffler question - by fixkick - 01-18-2017, 03:16 AM
RE: Muffler question - by fetcher - 01-18-2017, 03:20 AM
RE: Muffler question - by fetcher - 01-18-2017, 03:36 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)