01-13-2017, 04:20 AM
The ECU reports TPS errors over or near 4volt (too high errros)\
or below .2v.
unplugged or shorted to 5v errors.
the TCM (no spec here) does not tell you if it failing for , too high or low. (my guess would be too low) and from calibration wrong.
the IAT error means wire cut, or open. (high voltage)
or below .2v.
unplugged or shorted to 5v errors.
the TCM (no spec here) does not tell you if it failing for , too high or low. (my guess would be too low) and from calibration wrong.
the IAT error means wire cut, or open. (high voltage)
http://www.fixkick.com