01-08-2017, 08:55 AM
Hi, I am trying to clean the valve cover on my '95 sidekick. On the inside is a plate that covers the ports to the top of the valve cover (PCV & EGR I think). Anyway, that little cover inside the valve cover is fastened with 8 rivets. They don't look like any kind of rivets I have ever seen. I drilled them out.
I am thinking of threading the holes and putting it back together with screws and lock tight.
Have you messed with these before?
Just looking for advice from anyone who might know about the weird design of this valve cover.
Frank.
I am thinking of threading the holes and putting it back together with screws and lock tight.
Have you messed with these before?
Just looking for advice from anyone who might know about the weird design of this valve cover.
Frank.
1995 Suzuki Sidekick JX 4WD 4-door hardtop, G16 1.6L 16 valve L4 SOHC, 4-spd Auto Trans (Asin AW Model 03-72 LE), Non-ABS, Assembled in Ingersoil, Ontario. Currently in Tok, AK.