01-07-2017, 11:42 AM
Yes part 43 is the suspect raspy bearing. Do you have a PN?
Acksfaqs docs don't give much for tcase info... no diagrams like the one you uploaded. looks like my GEO manual. Great if you are interested in the speedo pickup or have no clue on seal replacement but otherwise pretty weak.
Apparently there are different configurations for the counter shaft. I have not seen anything like part 45 and the adjacent parts...is that the synchro?
The two special tools shown in your diagram are interesting. Looks to me like the lower one has the feet/hooks that would run in the slots I was trying to describe.
I have not yet run across any reference to indexing the shift collar(s).
Depending upon what you are attempting to do, there may be options (cheats). Looks to me like the main shaft could be removed in either direction. It is also possible to remove the chain without touching the upper chain gear on the main shaft.
Acksfaqs docs don't give much for tcase info... no diagrams like the one you uploaded. looks like my GEO manual. Great if you are interested in the speedo pickup or have no clue on seal replacement but otherwise pretty weak.
Apparently there are different configurations for the counter shaft. I have not seen anything like part 45 and the adjacent parts...is that the synchro?
The two special tools shown in your diagram are interesting. Looks to me like the lower one has the feet/hooks that would run in the slots I was trying to describe.
I have not yet run across any reference to indexing the shift collar(s).
Depending upon what you are attempting to do, there may be options (cheats). Looks to me like the main shaft could be removed in either direction. It is also possible to remove the chain without touching the upper chain gear on the main shaft.