one more view, this is TRANS out, new clutch day
ignoring 4wd axle.
that top rear right side, curve is where the starter plate goes. and you can see it , will not go to the rear. ever. ,, and shows the mess of cables and hoses in the way, too. lots in the way. and that intake brace #28
ignoring 4wd axle.
that top rear right side, curve is where the starter plate goes. and you can see it , will not go to the rear. ever. ,, and shows the mess of cables and hoses in the way, too. lots in the way. and that intake brace #28
http://www.fixkick.com