11-23-2016, 02:53 AM
on mine
the switch split. (self dissassembly)
then dropped a spring and ball bearing (single ball)
to the dash shelf below. i had to retrieve this. to rebuild the switch and then use tie wraps to cure this.
the work to access this is in the FSM
seen here.
http://www.acksfaq.com/2016bp.php?urlnam...kerfsm.htm
the switch split. (self dissassembly)
then dropped a spring and ball bearing (single ball)
to the dash shelf below. i had to retrieve this. to rebuild the switch and then use tie wraps to cure this.
the work to access this is in the FSM
seen here.
http://www.acksfaq.com/2016bp.php?urlnam...kerfsm.htm
http://www.fixkick.com