Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My frankensuk needs help.
#7
ah found a sy413 jimny fsm BOOK.
fuse f23 runs power the sammi cluster.
color,. B/W is power feed wire, from fuse. to cluster.

so if cluster gauges, work so does this wire.
then CEL lamp goes to Violet pin marked V. on the old SAMMI cluster. if you ground that wire the CEL glows.

this wire needs to go to the ECU, 58Bxx. class ECU , MPI .
this wire above must connect to ECU pin A14. (ON THE DONOR CAR THAT WAS VIOLET WITH YELLOW STRIPE. on A14 before trail tuff , fiddled it.

that is it takes besides, the DIAG jumper pin of the DLC..

http://www.fixkick.com/specs/95ecu1w.jpg

and

http://www.fixkick.com/specs/95ecu2w.jpg
http://www.fixkick.com
Reply


Messages In This Thread
My frankensuk needs help. - by FresnoDave80 - 11-06-2016, 07:13 AM
RE: My frankensuk needs help. - by fixkick - 11-06-2016, 08:19 AM
RE: My frankensuk needs help. - by fixkick - 11-06-2016, 08:20 AM
RE: My frankensuk needs help. - by FresnoDave80 - 11-07-2016, 12:32 AM
RE: My frankensuk needs help. - by fixkick - 11-08-2016, 06:02 AM
RE: My frankensuk needs help. - by fixkick - 11-08-2016, 06:15 AM
RE: My frankensuk needs help. - by fixkick - 11-08-2016, 06:39 AM
RE: My frankensuk needs help. - by FresnoDave80 - 11-10-2016, 09:09 AM
RE: My frankensuk needs help. - by fixkick - 11-10-2016, 10:18 AM
RE: My frankensuk needs help. - by fixkick - 11-10-2016, 10:23 AM
RE: My frankensuk needs help. - by FresnoDave80 - 11-10-2016, 11:06 AM
RE: My frankensuk needs help. - by FresnoDave80 - 11-10-2016, 11:29 AM
RE: My frankensuk needs help. - by fixkick - 11-11-2016, 01:36 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)