10-29-2016, 01:06 AM
harnesses 60a.
there are.
only 7 main harnesses, , and only 4 for 90 year (through fire wall main)
the IP harness (ecu) has 4 harnesses for 60a car. (my guess is you have not one of these 6 harness or was molested?)
the engine harness , just 1, for 60a.
the IP harness, ecu. is (harness suffixes)
a00 89.jx
a40, 89jlx
a70, 90 jx, jx
a80, 90.jlx
each of the 4 has pin A15 wired. for sure.
are you running this
Trail tuff harness
seen here.
http://www.trailtough.com/index.php?page...&Itemid=53
they have a (restricted) web site that does NOT document what they sell, just some vague OBD2 warnings, (horrors) and the red tag deal>?
The do that to keep the hacks a secret and no copy cats, (clones of their work) but really Id never ever, pay them to hack up my good harness, ever. for sure with no drawings sent up front.
it is stock harness conversion. They take yours and cut it up.
i guess some folks hate extra copper?, in a harness, seen that said . it's kinda odd that.... (extreme CG lowering OCD?)
why not just use what works perfect, a stock harness.
im told they delete pins and use non coax wire, where they are badly needed and for sure had that stock, (like cmp,ckp, and 02 are)
The also need VSS to work, if not the ECU will not be happy, if you look the FSM clearly stated VSS bad , limphome.
VSS tells the ecu your speed and lets the ECU compute LOAD< lacking this feature, (sensor) it will never run right.
do not delete sensors.
I have seen many post on this, where pins are missing, and worse. using custom harnesses.
If someone wants to know what each removed wire does, ,ask.... its well known.
cheers !!!
there are.
only 7 main harnesses, , and only 4 for 90 year (through fire wall main)
the IP harness (ecu) has 4 harnesses for 60a car. (my guess is you have not one of these 6 harness or was molested?)
the engine harness , just 1, for 60a.
the IP harness, ecu. is (harness suffixes)
a00 89.jx
a40, 89jlx
a70, 90 jx, jx
a80, 90.jlx
each of the 4 has pin A15 wired. for sure.
are you running this
Trail tuff harness
seen here.
http://www.trailtough.com/index.php?page...&Itemid=53
they have a (restricted) web site that does NOT document what they sell, just some vague OBD2 warnings, (horrors) and the red tag deal>?
The do that to keep the hacks a secret and no copy cats, (clones of their work) but really Id never ever, pay them to hack up my good harness, ever. for sure with no drawings sent up front.
it is stock harness conversion. They take yours and cut it up.
i guess some folks hate extra copper?, in a harness, seen that said . it's kinda odd that.... (extreme CG lowering OCD?)
why not just use what works perfect, a stock harness.
im told they delete pins and use non coax wire, where they are badly needed and for sure had that stock, (like cmp,ckp, and 02 are)
The also need VSS to work, if not the ECU will not be happy, if you look the FSM clearly stated VSS bad , limphome.
VSS tells the ecu your speed and lets the ECU compute LOAD< lacking this feature, (sensor) it will never run right.
do not delete sensors.
I have seen many post on this, where pins are missing, and worse. using custom harnesses.
If someone wants to know what each removed wire does, ,ask.... its well known.
cheers !!!
http://www.fixkick.com