10-26-2016, 11:19 PM
the maf is like $1000 at suzuki, over that.
the clones from china for $100 are junk.
best is clean it first. if the output voltages are low, from a distance. 6 inches back, do not use CRC maf spray, and direct the nozzle 1inch away from the very fragile hot wire.
do not.
but yes, spray it , count to 10 and repeat 3 times, this gets the coked up wire juicy and loose and the next clean flushes it away..
this technique is harmless.
the clones from china for $100 are junk.
best is clean it first. if the output voltages are low, from a distance. 6 inches back, do not use CRC maf spray, and direct the nozzle 1inch away from the very fragile hot wire.
do not.
but yes, spray it , count to 10 and repeat 3 times, this gets the coked up wire juicy and loose and the next clean flushes it away..
this technique is harmless.
http://www.fixkick.com