the person on zuharrie, asks question , fully covered in step 6,
it states remove the axle snap ring, (not the wheel hub nor bearing of same or nuts for same,)
the hub comes off in chapter 4c page 8, exposing the snap ring, seen many of these cars missing this ring.
there are 14 steps just to extract it. on page 8 and 9.
step 10, see the word slowly there, they are dropping the lower ball, freeing up the spindle.
my page shows that snap ring as ID 14, on pan drop page.
do you get hung up on any of the 14 steps, say so and we can elaborate each step.
it states unit repair is covered later in this section
true
starting on page C4-14. (page 16 a step there shows installing the boot)
it states remove the axle snap ring, (not the wheel hub nor bearing of same or nuts for same,)
the hub comes off in chapter 4c page 8, exposing the snap ring, seen many of these cars missing this ring.
there are 14 steps just to extract it. on page 8 and 9.
step 10, see the word slowly there, they are dropping the lower ball, freeing up the spindle.
my page shows that snap ring as ID 14, on pan drop page.
do you get hung up on any of the 14 steps, say so and we can elaborate each step.
it states unit repair is covered later in this section
true
starting on page C4-14. (page 16 a step there shows installing the boot)
http://www.fixkick.com