08-28-2016, 12:09 PM
(08-28-2016, 06:52 AM)kyle.mccarley Wrote: Hello everyone I recently got a 1995 sidekick 4door for a new toy and I have been going through the motions getting it running right. It had been setting for several years and after a tune up and oil change it has been firing up and running. The issues i have came along now is that my number 2 cylinder fuel injector is blowing fuel like crazy. Plug will be soaked when i pull it out and I have determined that I have a wiring issue. I have tested all of my injectors and they are all working fine and I also have checked all of my compression on all cylinders. I am thinking that I have a problem in the wiring harness that controls the injectors. My question is do I need to change out the entire harness or can I look for a wire thats grounding out or something. Also If its the harness I need to change I havent been able to find anywhere that has that part so if anyone has the part number that would be a huge help. I have some other issues with the thing in the 4wd but im trying to get the motor running right before I start messing with all of that. Thanks for any help and I look forward to talking to you all. This seems like a great group. thanks again.
one pin on the injectors is 12vcd
the the other fires to ground, about 3/1000th of a second at idle.
did you use a noid lamp on the 2 pins of injector 2, to see, that its not glowing at keyon, then flashes, running, running it will seam to glow.
its just 2 wires, to the ecu, actually its one wire the other is 12vdc bus, power across all 4, there.
that one wire, must not gound out.
are you sure spark is ok to #2, if not it will flood. no stopping that if it dont spark right.
http://www.fixkick.com