06-27-2016, 12:01 PM
(This post was last modified: 06-27-2016, 12:06 PM by Michtrackerproject.)
plan on running 235/ 15's ,and I got my ratios backwards ,, I would need to go to the 430 gears to get a decrease in my rpm.. the 512s will only make it worse, ,,.. is there anyway to check the ratios of the gears without breaking open the diffs,, being as I have no clue what's really in this truck, axles and t case wise.. all I am sure of is that the chassis and axles seem to be factory. LSI 1991 2dr auto, 1.6 8v not original, trans not original, "I just changed it," from a 91 92 2dr auto, supposed to be a body plate that should have some info ,,, any way to find out the ratios if the axles are original would be nice.
lastly . .. the detent/ kickdown / TY cable .. all the same cable just different names here ? if its the same then I have yet to connect this still trying to get the cam and lobes from a donor,
lastly . .. the detent/ kickdown / TY cable .. all the same cable just different names here ? if its the same then I have yet to connect this still trying to get the cam and lobes from a donor,