05-20-2016, 03:25 AM
(This post was last modified: 05-20-2016, 03:35 AM by Michtrackerproject.)
issue here is if i set the cam gear as per your pic #1 blow test rocker test fails..i don't have the cover off yet.. so only blow test. but same same,, fails at 60a at 12oclock.. works with 60a . at 6oclock, ...tdc physically checked, with crank at 12oclock and #1 at tdc.. i reset the cam to be #1 passes blow test at 6oclock, tdc crank at 12oclock,,,,stil fails to fire dizzy pointed at #1. but ya i can see 38 bad ways one good makes this a pain..
ok edit here do i want the cam to be at 12 and fail the blow test .. and fire ar 6 oclock...?> while cam is at tdc or 180 of tdc.. engine is all kind of backwards, as i am reading description you say it should pass blow test at 6 oclock but not 12 oclock.....so 6oclock on cam should align with crank at 12.. for #1 firing,...
ok edit here do i want the cam to be at 12 and fail the blow test .. and fire ar 6 oclock...?> while cam is at tdc or 180 of tdc.. engine is all kind of backwards, as i am reading description you say it should pass blow test at 6 oclock but not 12 oclock.....so 6oclock on cam should align with crank at 12.. for #1 firing,...