04-30-2016, 01:53 AM
King does a bang up job. (by a PHD)
http://kingbearings.com/wp-content/uploa...sional.pdf
Our G16 has hydradynamic bearing.. (not round but lemon shaped) that forms a wedge of oil. (best case)
Additionally sometimes the maximum value of minimum oil
film thickness may be reached when the values of other
hydrodynamic parameters such as oil temperature, oil leakage
flow or oil pressure distribution become unacceptable.
However, too large a flow of oil leakage may
cause a drop of oil pressure and even oil
starvation, which terminates hydrodynamic
lubrication.
Oil leakage from a bearing with excessive
clearance may be reduced by changing to a higher
viscosity oil.
http://kingbearings.com/wp-content/uploa...sional.pdf
Our G16 has hydradynamic bearing.. (not round but lemon shaped) that forms a wedge of oil. (best case)
Additionally sometimes the maximum value of minimum oil
film thickness may be reached when the values of other
hydrodynamic parameters such as oil temperature, oil leakage
flow or oil pressure distribution become unacceptable.
However, too large a flow of oil leakage may
cause a drop of oil pressure and even oil
starvation, which terminates hydrodynamic
lubrication.
Oil leakage from a bearing with excessive
clearance may be reduced by changing to a higher
viscosity oil.
http://www.fixkick.com