Only that rod, the rest are good. Is metal for sure, I could not penetrate with a paper clip. Is gonna take more than that.
I say longer to reassemble because i have to wait until school is out. (remember is wife's main car, no school, then car can be worked on without hurries.
See what I mean by the take longer part?
In order to not spend more cash on a donor crank Me like U, (the term you have used before) Im a penny pincher? I can use mine from my current running engine, then mike, measure and if needed regrind.
Yes all pistons are code 1 validated (or at least printed) on block as you see in picture.
J
Do you have any idea on new rings price from Suzuki? Yes of course new rings are part of the overhaul, as well as bearings, oil pump etc.
BTW, what do I need to check, test on the new oil pump?
Javier
Ok, found some prices. Piston rings are $72 a set for only one piston!! Ouch!! The bearings (rods) are priced at $25 and main also $25. Thrust are $22. But these don't specify if for only one or as a set? m also getting new cog and bolt as well as all 3 seals. Could I use my tensioner, T-belt and pump from my running engine? Its been only 1.3 years since I used them. Or go all new in this build?
Gracias!!
I say longer to reassemble because i have to wait until school is out. (remember is wife's main car, no school, then car can be worked on without hurries.
See what I mean by the take longer part?
In order to not spend more cash on a donor crank Me like U, (the term you have used before) Im a penny pincher? I can use mine from my current running engine, then mike, measure and if needed regrind.
Yes all pistons are code 1 validated (or at least printed) on block as you see in picture.
J
Do you have any idea on new rings price from Suzuki? Yes of course new rings are part of the overhaul, as well as bearings, oil pump etc.
BTW, what do I need to check, test on the new oil pump?
Javier
Ok, found some prices. Piston rings are $72 a set for only one piston!! Ouch!! The bearings (rods) are priced at $25 and main also $25. Thrust are $22. But these don't specify if for only one or as a set? m also getting new cog and bolt as well as all 3 seals. Could I use my tensioner, T-belt and pump from my running engine? Its been only 1.3 years since I used them. Or go all new in this build?
Gracias!!
Sidekick 94, 1.6L Engine 16v
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico