Swapping a 97 short block into my 94

[zukitrek]

Looks like this oil hole at piston rods got blocked. Was it bearing material from oil starvation or something else? Here some pics. All my pistons are coded 1 on top of dome. Block engraving also lets you know. The thing is guy removed them, so I really don't which 1 goes into which 1 cylinder.

http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=294

http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=293

Mains saddles are good at both sides They do regrind and polish cranks here starting $75. I still can use mine. Is just the it will take longer to assemble the engine. But Ill study my options.

Javier