04-19-2016, 10:35 PM
always remove the filler first
if you can't get it out , do not drain it or the car is now UN-drivable.
all non serviced cars, like the these plugs are frozen soldid with the factory Loctite™ thread sealer USED , and gets too hard after 29 years. heat it to remove it.
if you can't get it out , do not drain it or the car is now UN-drivable.
all non serviced cars, like the these plugs are frozen soldid with the factory Loctite™ thread sealer USED , and gets too hard after 29 years. heat it to remove it.
http://www.fixkick.com