04-18-2016, 04:39 AM
it filled just like all m/t
the drain bolt is 10mm square drive
is you uses 3/8" ratchet drive, it usually strips it
if never removed before ? then the sealant that suzuki uses there, turns to like diamond hard (1/2 joking)
and is impossible to remove.
but the cure is heat , use a propane torch , hot enough to burn spit.
and not it comes out easy
my page shows the tool
tools page
https://www.google.com/search?q=CTA-Tool...49-Sockets+
not easy to find.
http://www.ebay.com/itm/TWO-PIECE-8MM-10...35&vxp=mtr
but they fit perfectly
the drain bolt is 10mm square drive
is you uses 3/8" ratchet drive, it usually strips it
if never removed before ? then the sealant that suzuki uses there, turns to like diamond hard (1/2 joking)
and is impossible to remove.
but the cure is heat , use a propane torch , hot enough to burn spit.
and not it comes out easy
my page shows the tool
tools page
https://www.google.com/search?q=CTA-Tool...49-Sockets+
not easy to find.
http://www.ebay.com/itm/TWO-PIECE-8MM-10...35&vxp=mtr
but they fit perfectly
http://www.fixkick.com