Hello 
So I looked at the cables of the connectors...
At the OBD2 connector I have only cabels number 9, 16, 5... So it seems that is is not real OBD2
The colors of the other 2 connectors - please see the picture:
What I should do now to make the DTC check ?
Do I need to Jumper 2 to 4 pins on connector 1 and see the CEL for the DTC?
Or I need to Jumper the pin with black wire to diagonal pin on connector 2 ?
So I looked at the cables of the connectors...
At the OBD2 connector I have only cabels number 9, 16, 5... So it seems that is is not real OBD2
The colors of the other 2 connectors - please see the picture:
What I should do now to make the DTC check ?
Do I need to Jumper 2 to 4 pins on connector 1 and see the CEL for the DTC?
Or I need to Jumper the pin with black wire to diagonal pin on connector 2 ?
Made in Japan Suzuki Vitara 1997, 4x4, 16 valves, MPI EFI, 4 speed, Automatic, 1.6L, 5 door, from Israel, VIN: JSAETD01VV1200XXX, market: E54