09-21-2013, 11:44 PM
What's up guys!, code P0300 came back this past week, I think I found the issue, it seems to be a loose wire on the connector going into the distributor base, every time I touched the wires going to the plug, the car hesitated. Most of them are in bad shape anyway. What would be the best approach to fix this connector? do the wires push out? Unfortunately, the issue seems to be where the wire goes into the plug (this is all on the harness side of the connector, not on the dizzy side)
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c