Stock the pressure was 70 psi it has always been like that before I've even touched it. Original Engine had done 275000 kms no problems with oil filters I use ryco filters burns no oil all aftermarket bearings now bought it how it is it could of been changed but everything else in engine was stock all the pressure reg and pump was all checked and turned out all ok
|
Cold idle when hot?
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Cold idle when hot? - by Deadduck - 03-15-2016, 06:06 PM
RE: Cold idle when hot? - by fixkick - 03-15-2016, 11:21 PM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 03:07 AM
RE: Cold idle when hot? - by fixkick - 03-16-2016, 03:27 AM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 04:23 AM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 05:07 PM
RE: Cold idle when hot? - by fixkick - 03-16-2016, 11:23 PM
RE: Cold idle when hot? - by Deadduck - 03-17-2016, 04:25 AM
RE: Cold idle when hot? - by fixkick - 03-17-2016, 05:02 AM
RE: Cold idle when hot? - by Deadduck - 03-18-2016, 10:57 AM
RE: Cold idle when hot? - by Deadduck - 03-18-2016, 06:57 PM
RE: Cold idle when hot? - by fixkick - 03-18-2016, 11:14 PM
RE: Cold idle when hot? - by Deadduck - 03-19-2016, 02:13 AM
RE: Cold idle when hot? - by fixkick - 03-19-2016, 04:34 AM
RE: Cold idle when hot? - by Deadduck - 03-19-2016, 03:28 PM
RE: Cold idle when hot? - by fixkick - 03-20-2016, 01:54 AM
RE: Cold idle when hot? - by Deadduck - 03-20-2016, 04:25 PM
RE: Cold idle when hot? - by fixkick - 03-20-2016, 11:58 PM
RE: Cold idle when hot? - by fixkick - 03-21-2016, 03:19 AM
RE: Cold idle when hot? - by Deadduck - 03-21-2016, 03:49 AM
RE: Cold idle when hot? - by fixkick - 03-23-2016, 10:41 PM
|
Users browsing this thread: 1 Guest(s)