03-19-2016, 06:33 AM
(This post was last modified: 03-19-2016, 06:43 AM by Michtrackerproject.)
Currently not drivable ,, so no road tests ,, rpm, and trans I'm not sure of hence the question,, but also I am not sure I dont have a seized wheel ,/hub bearing car sat for over 2 years in a driveway....""someone else's project that got put on hold."" I have running high idle maybe due to vacuum,, or other.. but runs.
Shift into drive and apply throttle and the car will not move till I get rpms to 2500 or more.. but again could be bad bearing, seized caliper etc etc...
Also the diagrams are great but they all look like spaghetti to me not book smart only hands on smart...
Thank you again will have more info soon, weekends here time to wrench..
Another question I cant find an direct answer to I have in the current truck auto lock hubs can I change them for the manual lock ones from the donor truck,, or is each axle different.,,..
Shift into drive and apply throttle and the car will not move till I get rpms to 2500 or more.. but again could be bad bearing, seized caliper etc etc...
Also the diagrams are great but they all look like spaghetti to me not book smart only hands on smart...
Thank you again will have more info soon, weekends here time to wrench..
Another question I cant find an direct answer to I have in the current truck auto lock hubs can I change them for the manual lock ones from the donor truck,, or is each axle different.,,..