Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cold idle when hot?
#13
Cold RPM 1400-1500rpm
Outdoor airtemp between 20-27°c
Oil is penrite running in oil 15w40
Old block had a crack through bearing journal so block rooted new block same crank all measured all gaps within 1 thou
No seal on bottom of pick up? Just a press fit into block can I seal at all I now have to drop diff and sump again to try and. Fix
Reply


Messages In This Thread
Cold idle when hot? - by Deadduck - 03-15-2016, 06:06 PM
RE: Cold idle when hot? - by fixkick - 03-15-2016, 11:21 PM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 03:07 AM
RE: Cold idle when hot? - by fixkick - 03-16-2016, 03:27 AM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 04:23 AM
RE: Cold idle when hot? - by Deadduck - 03-16-2016, 05:07 PM
RE: Cold idle when hot? - by fixkick - 03-16-2016, 11:23 PM
RE: Cold idle when hot? - by Deadduck - 03-17-2016, 04:25 AM
RE: Cold idle when hot? - by fixkick - 03-17-2016, 05:02 AM
RE: Cold idle when hot? - by Deadduck - 03-18-2016, 10:57 AM
RE: Cold idle when hot? - by Deadduck - 03-18-2016, 06:57 PM
RE: Cold idle when hot? - by fixkick - 03-18-2016, 11:14 PM
RE: Cold idle when hot? - by Deadduck - 03-19-2016, 02:13 AM
RE: Cold idle when hot? - by fixkick - 03-19-2016, 04:34 AM
RE: Cold idle when hot? - by Deadduck - 03-19-2016, 03:28 PM
RE: Cold idle when hot? - by fixkick - 03-20-2016, 01:54 AM
RE: Cold idle when hot? - by Deadduck - 03-20-2016, 04:25 PM
RE: Cold idle when hot? - by fixkick - 03-20-2016, 11:58 PM
RE: Cold idle when hot? - by fixkick - 03-21-2016, 03:19 AM
RE: Cold idle when hot? - by Deadduck - 03-21-2016, 03:49 AM
RE: Cold idle when hot? - by fixkick - 03-23-2016, 10:41 PM

Forum Jump:


Users browsing this thread: 4 Guest(s)