Engine finally runs OK, but no real power!

[Zackman]

As per usual, thank you FIXKIXK for your speedy reply.
Apparently there are several things I should be looking into. However, I have a few questions in regard to your reply.
1. You mentioned: good the rhino tool , i have the page that answers this
I did a search in your website, but could not find any info. In other words, do you have the average values of the values that are supported by the Rhno's software?

2. You mentioned "LTFT i where. centered hot idle 118?"
Could you please explain what you mean? what is "LTFT i where."?

3. You mentioned "in closed loop, at hot idle"
How do I determine this?

4. You mentioned: "idle switch on?"
How do I determine this

Thanks very much!
Zackman