02-01-2016, 11:14 AM
So I tested for spark again and I'm not getting spark at all on any cylinder or from the ignition coil to distributor. The ignition coil is new and I tested for resistance and it meets the specs for primary and secondary. I tested the voltage on the plug to the ignition coil and it has power (meets what's required but can't remember the exact reading). I'm not sure what else could be causing a no spark. I looked over your page for cranks but won't start but there's a lot of information on there and I'm on a bit on a time limit now. I don't have a jumper to connect to hook up and I've called every auto store near me and no one has one. So if there's a way to make one at home walk me through it if it's necessary to see what's going on now. As always, I appreciate all the help.