01-11-2016, 01:18 AM
Thanks Fixkick. So, when I finish the body work I should install; fuel system (tank & lines), then suspension system, then brake system. Leave the front bumper assembly and upper radiator supports off and, when they are ready, connect the engine, transmission, and transfer case together and install as a single unit. OK. that will be my long-range plan. So, the exhaust system will go in after or should I put the pipes in place before I attach the suspension?
I have left the wiring harness alone thinking I would just use it the way it is. Then I was thinking maybe I should rewire the whole thing with new wires. Then I started looking at the wiring diagram and all the different types of connectors that are used and decided I should just leave the wiring alone. Any thoughts on 20-year-old wiring?
I have left the wiring harness alone thinking I would just use it the way it is. Then I was thinking maybe I should rewire the whole thing with new wires. Then I started looking at the wiring diagram and all the different types of connectors that are used and decided I should just leave the wiring alone. Any thoughts on 20-year-old wiring?