Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chassis Measurements Off. Important?
#5
Follow Up:

The long bolts that connect the body to the frame are not perfectly up and down, they are a little bit sideways. When I measured to the corners of the frame they came out exactly the same and correct on the front end and in the middle section. The back end is off by a half centimeter so I looked closer and discovered that the frame was crushed in slightly directly above the left rear wheel. I spent a lot of time trying to straighten it, but my efforts made very little difference.

I have decided to leave it because the damage is very small and located aft of the suspension connection points so I am thinking that it will not effect the alignment of the wheels.
Reply


Messages In This Thread
RE: Chassis Measurements Off. Important? - by Nunapitchuk - 12-05-2015, 11:46 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)