12-03-2015, 12:43 AM
Hello,
I have been reading with interest the section 'How to set ignition timing' in the FixKick site.
Out of curiosity, I went to look at my distributor wires and noticed straight away that the firing order in my Sidekick 16Valves was set by the mechanic very different!
Starting from 1pm and going counter clock wise it is: 4-2-1-3!
And the adjustment screw of my distributor is totally on the left side(see photo of distributor).
Does anyone have any considerations/comments?
Thanks in advance!
I have been reading with interest the section 'How to set ignition timing' in the FixKick site.
Out of curiosity, I went to look at my distributor wires and noticed straight away that the firing order in my Sidekick 16Valves was set by the mechanic very different!
Starting from 1pm and going counter clock wise it is: 4-2-1-3!
And the adjustment screw of my distributor is totally on the left side(see photo of distributor).
Does anyone have any considerations/comments?
Thanks in advance!