07-30-2013, 12:52 PM
this scans are not moving.
yes, you can test that wire, end to end ,use any voltmeter, key off.
meter on soleniod green and matching ECU green, (not easy with out long test wire)
get near zero OHMS. 0.3 omega sign, auto-ranger or run lowest range ,of ohms , say Rx2 same about 0.3 ohms that is just normal small resistance,
if you you read say 30 ohms the only 6 volts gets to the solenoid, so the Resistance must be near zero.
good evening.
yes, you can test that wire, end to end ,use any voltmeter, key off.
meter on soleniod green and matching ECU green, (not easy with out long test wire)
get near zero OHMS. 0.3 omega sign, auto-ranger or run lowest range ,of ohms , say Rx2 same about 0.3 ohms that is just normal small resistance,
if you you read say 30 ohms the only 6 volts gets to the solenoid, so the Resistance must be near zero.
good evening.
http://www.fixkick.com