Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trouble Installing Dizzy
#9
ahahhahahahahahh
ok, you got me..

the fsm who;'s fsm
GM geo tracker (full of lies)
or Suzuki. (dead accurate)
the GM book has photos of wrong distributor and wrong rotor direction. and more..
or do you mean autostore rags..?

if the #1 cylinder is firing
and the rotor aligned with #1 distrib cap post. it will run. 1,3,4,2 CCW lay out. of wire.
good engine
good spark
good timing,
runs. (at least on test fuel it will)

there are other horrors I should not speak, seen some wild stuff, (stripped out front damper pulley inside rubber,makes marks all lies.or dizzy gear on backwards.

most the lies in GM books are 1996 year, the only free one.... sadly.
http://www.fixkick.com
Reply


Messages In This Thread
Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 01:38 PM
RE: Trouble Installing Dizzy - by gorkyb - 11-29-2015, 03:31 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 04:10 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 10:28 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 11:28 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 02:48 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 02:56 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 05:18 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 05:23 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 06:29 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 08:07 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 08:39 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 09:13 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-03-2015, 12:43 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 01:06 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 03:35 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-04-2015, 05:09 AM
RE: Trouble Installing Dizzy - by fixkick - 12-04-2015, 05:53 AM

Forum Jump:


Users browsing this thread: 5 Guest(s)