evap code PO0443

[dynabill]

Hey Jerry, got up this morning and checked item 4 on your last post. I got engine to hot idle and pulled hose leading to the canister, there was no vaccuum, pulled top hose from vsv to plenum and have good vaccuum from intake, which is a good thing, lol. I them back probed the vsv and have no voltage registering from it. I reset back probes several times to insure I was getting a connection. Still no voltage registering from vsv. I now have dtc's reset and have car idleing in drive. with vsv hose detached from the evap canister. trying to get a new code to pop or the same one. per your instructions. I am going to take it for a drive with scan tool attached, it may come up with better info if a code pops.