(11-20-2015, 09:54 AM)fixkick Wrote: no, that page is all OBD2.
sorry.
only KIA/Hyundai knows this,
the eprom can be disassembled to machine code.
then reverse engineered, a man/ years work. there.
i bet flash codes work but the lamp is missing in the car, so says the schematics.
id try go get flash codes working first.
thank's
i do the flash cod From this http://www.troublecodes.net/Kia
this work well on my care
Dear fixkick : i think to try go interface MAKER in here and request help them . if them help me !!!
what do you think . Can i use logic analyzer for see signal and know protocol ?
i see the arduino Forum . here https://forum.arduino.cc/index.php?topic=236092.0
post 2 : answer from robtillaart : you need a logic analyzer to determine the baudrate and to see the data.