Mr. Carlos,
sorry for your PC (issues)
btw, see the new low cost tool i found that can do Duty cycle on your care easy.
post 24, im testing the meter , using ISC Driver, simulator. to be sure it works at 200HZ and 12-14vdc.
http://www.fixkick.com/bbs2/Suzuki-bbs/s...768&page=3
many regular DMM meters, do not work, about 1/2 dont , the expensive Fluke 87v 88v (v = vehicle) are $400 to $800 USD,
these new meter seen on ebay (bought just for that and for the tach/dwell modes)
works. all three features work,
sorry for your PC (issues)
btw, see the new low cost tool i found that can do Duty cycle on your care easy.
post 24, im testing the meter , using ISC Driver, simulator. to be sure it works at 200HZ and 12-14vdc.
http://www.fixkick.com/bbs2/Suzuki-bbs/s...768&page=3
many regular DMM meters, do not work, about 1/2 dont , the expensive Fluke 87v 88v (v = vehicle) are $400 to $800 USD,
these new meter seen on ebay (bought just for that and for the tach/dwell modes)
works. all three features work,
http://www.fixkick.com