16v ECU acting up code 12s with jumper engine won't start

[zukitrek]

TCM was jumpered last week and driven and only got 12's all the time. DLC was also jumpered 2 and 4 and got only 12's key on. I still have the engine shutting off with clip on. That one is still bugging. All fuses where checked sand looked ok.

Ill keep you posted.

Ok fix, this is a post I did from the A/T 4speed fails thread. What was happening to me before.
Now just a while ago, when I got back from work I tried the DLC jumper and 12's all the way but, what do you now? ... car started! So what could have prevented her from starting up last time?
Me, no idea. I did a video of it. Will send later on.

Now what would be next? Those TPS switch ohms look OK to you? I did it with a very warmed up engine. I don't know if that contributes or does not matter?

Javier