DIAG + no start, is a first time.
never even a Rumor of this.
but i can tell you , i'd be all over spark and fueling and adding fresh air to see what the ECU is doing, wrong. with DIAG added.
watch out for very tight ECU mounting screws, most are very hard to take out, first time. #3 philips.
please make sure you are jumping the right pins.
never even a Rumor of this.
but i can tell you , i'd be all over spark and fueling and adding fresh air to see what the ECU is doing, wrong. with DIAG added.
watch out for very tight ECU mounting screws, most are very hard to take out, first time. #3 philips.
please make sure you are jumping the right pins.
http://www.fixkick.com